Adding IP Cameras to a UNV XVR

  1. Connect Switch to router via an Uplink port
  2. Connect XVR and IP Cameras to switch
  3. On the XVR, go to Menu > Camera > Camera tab
  4. To add a camera in addition to the coax channels e.g. D5, click the green + icon

To add a camera in place of a co-ax channel e.g swap A4 for D4

  • Click the Camera Type tab
  • Change the Camera ID from Analog to Digital, click Apply

  • Allow the recorder to reboot, then go back to Camera > Camera tab
  • Add a camera as in step 4
  1. IMPORTANT To ensure the cameras have a static IP, click the Config icon, then change the last segment of the IP address. It’s recommended to use a number high up in the range, to avoid conflict with other network devices e.g.

Leave a Comment

Your email address will not be published. Required fields are marked *