If you see this message appear in place of a camera image, it means the recorder has reached its capacity for decoding images. To remedy this, go into: Menu > System > Preview > Advanced and enable the check box for ‘Use Sub Stream First’ This will force the recorder to display the sub stream image …
‘No resource’ is displayed on the monitor output Read More »
Uniview camera firmware is updated on a regular basis, so it’s best to use the ‘Batch Upgrade’ feature in the NVR menu. You can also use the ‘Online Upgrade’ button within EZTools. Due to the large number of models and versions, it is not practical to keep this page up to date. If you require a …
Manual PDF Manual for all NVR models (v1.13) (Updated 18/10/2019) Firmware We recommend that you use the Cloud Upgrade option in the Maintenance menu to check for upgrades first, since it will always have the most up to date firmware. This page no longer hosts direct downloads of firmware for an offline upgrades, please contact technical@cctvdirect.co.uk and the …
To access the RTSP streams of a Uniview system, please use the following format: NVR rtsp://admin:123456@192.168.1.30:554/unicast/c1/s0/live c1 = Camera 1 s0 = Main Stream (1 sub, 2 third) Substitute your own password or RTSP port number (554) if they have been changed Direct from Cameras Main rtsp://admin:123456@192.168.1.192/media/video1 Sub rtsp://admin:123456@192.168.1.192/media/video2
Connect Switch to router via an Uplink port Connect XVR and IP Cameras to switch On the XVR, go to Menu > Camera > Camera tab To add a camera in addition to the coax channels e.g. D5, click the green + icon To add a camera in place of a co-ax channel e.g swap …